use:
Valve grinding cone
Features:
1. Fully automatic loading and unloading, automatic dressing grinding wheel, automatic compensation of grinding wheel
2. Roundness: <0.002mm, jitter: <0.02mm, calibration line: <0.02mm
3, high efficiency: less than 8 seconds / support, one person can operate multiple devices
Project | Specifications | Units | Basic Attachment | Quantity |
Valve stem diameter | Æ4.0- Æ12.0 | mm | Coolant tank | 1set |
The total valve length | 39-180 | mm | Proximity switch | 2pcs |
Valve cone diameter | Æ12-Æ 60 | mm | Magnetic Switch | 2pcs |
Wheel diameter | Æ600 | mm | Mechanical finger | 1pcs |
Maximum wire speed | 60 | m/s | Hexagonal wrench | 9pcs |
Main Motor Power | 5.5 | KW | Hexoid Sleeve wrench | 1pcs |
Headstock Spindle Speed | Servo Motor Adjustment | Event Boarder | 1pcs | |
Power Requirements | 3-AC380 | V | Wheel balance shaft | 1pcs |
Compressed air | 4.5-7 | Kg/cm2 | Flange Unloading Nuts | 1pcs |
Dimensions (length X width X height) | 2100X1950X1911 | mm | Machine mattress iron | 6pcs |
Machine Net | 6000 | Kg | Special accessories (optional) | 6pcs |
Machining accuracy | Oil Fog Purifier | |||
cone roundness | <0.002 | mm | Coolant Filter | |
Cone facing the pole | <0.02 | mm | Coolant oil sand centrifuge | |
Cone Roughness | Ra<0.32 | mm | ||
rod end to calibration line distance | 0.02 | mm |
![]()
|
|